Tell us which warning light came on and what your car was doing at the time. We’ll confirm which scanner checks your vehicle supports, explain the findings and agree on the next step with you.
Diagnostic information updated 29 October 2026 · Independent multi-brand workshop
Tell us the vehicle’s year of manufacture, variant, engine or fuel type, and the exact warning message. Different versions of the Hector Plus Earlier Versions may have different control units and require different diagnostic access.
Read the service guide for the MG Motor Hector Plus Earlier Versions →
This is a model-specific enquiry page. The workshop can confirm which checks your model year and control system support.
CarTech Hub uses LAUNCH Scan Plus X and XTOOL Compass for scanner-assisted fault finding in Sawkuchi, Guwahati. Share your car’s make, model, year, fuel type and warning message so we can confirm the relevant scanner coverage before your visit.
Ask about a Scan Plus X check when reporting a warning light, starting problem or electronic-system concern. We first confirm communication with the relevant control unit and the diagnostic functions available for your vehicle.
The installed software, vehicle year, engine and control unit determine which checks are possible. Code reading, live-data checks and service functions are confirmed for the job before work begins.
LAUNCH official vehicle-coverage resource ↗XTOOL’s Compass information lists fault-code reading and clearing, live data, freeze-frame information, actuator tests and reports from scans before and after work. Availability depends on the vehicle and supported system.
We use the relevant information to investigate your complaint and explain the next check. XTOOL lists Compass and Compass Master configurations separately, so optional hardware and programming access are confirmed for each task.
XTOOL official Compass product information ↗We accept scanning enquiries for Indian, Japanese, Korean, European and other car brands. A brand or model listing does not confirm access to every control unit. The vehicle’s ECU, software version, licence, security access and any required accessories affect the work we can accept.
Ask separately about service resets, adaptations, coding, programming, ADAS calibration or EV high-voltage work. These need the right equipment and procedures; they are not automatically part of a basic scan. A fault code helps direct an investigation and does not by itself prove which part needs replacing.
XTOOL vehicle and function lookup ↗ Find your brand and model →
CarTech Hub first records the warning and the driving conditions in which it appeared. On supported vehicles, the technician reads the engine, ABS or airbag control module and checks whether its fault codes are current or stored. For an engine complaint, freeze-frame data and sensor readings can show the engine’s operating conditions when the fault occurred. For ABS, individual wheel-speed readings can help isolate an inconsistent signal. An airbag warning calls for a restraint-system assessment using the manufacturer’s procedures. The technician explains any further tests and discusses the repair estimate with you before you approve the work.
A fault code is one clue. The technician compares it with the symptoms you describe and the condition of the vehicle before recommending further checks.
Share the vehicle details, warning message, recent work and the conditions in which the issue appears.
We check whether the scanner supports the system you want tested and agree with you on what the initial assessment will cover.
Available codes and data guide further electrical or mechanical checks. A stored code alone does not justify replacing a part.
Discuss what is confirmed, what still needs testing and the estimate before approving further work.
Where appropriate, repeat relevant checks and review the original complaint. Clearing the warning light alone is not a completed diagnosis.
The directory has 765 model entries across 36 brands, including earlier generations and variants. Choose your car and tell us its model year, fuel type, variant and warning message. The workshop will confirm which control units it can check and which repairs it can undertake.
19 matching model entries · Showing 1–19 · Browse MG Motor diagnostics
Coverage depends on the model year, control unit, software and access requirements. Tell us the symptoms or warning message so we can check whether the relevant function is supported before you visit.
A code records a condition detected by the car. A technician may need to inspect wiring, power supply, mechanical components or operating conditions before recommending a replacement.
Programming and calibration are separate jobs. Before booking, ask what hardware and software access the work requires, whether a trained technician is available and what the work would cost for your vehicle.
Bring your vehicle details, a description of the symptoms, relevant service records and any earlier scan report. Tell us about recent battery work and whether anyone cleared the fault codes.
Describe each symptom separately, including when it appears, recent fuel or repair history and any available warning information. Starting after overnight parking, hesitation with passengers and overheating in traffic lead to different checks; petrol ignition and diesel fuel-system parts should not be combined into one assumed diagnosis.
Ask what evidence supports an injector, turbocharger, mount, water-pump or internal-engine recommendation. A warning message or noise alone is insufficient. Advanced engine rebuilding, turbo rebuilding, emissions-system intervention and hybrid electronics are only considered through confirmed capability or referral. An unsafe overheating or severe running concern may require recovery instead of a road journey to the workshop.
Note whether the shudder appears during engagement, manoeuvring or after prolonged traffic. Those conditions help frame diagnosis without proving the cause; CarTech Hub should explain its diagnostic limits and any specialist referral before a DCT or CVT repair is accepted.
In a multi-row SUV, a complaint from rear passengers deserves a clear description of airflow and cooling, not an assumption that every vent arrangement is identical. Cabin filters, blower behaviour and supported AC checks can establish whether the problem is local airflow or overall cooling. Refrigerant and compressor work require appropriate equipment and confirmed competence.
Door closure, seals, seat access and tailgate operation are also relevant to a family vehicle assessment. Battery, alternator, starter, lighting and accessible electrical concerns should be diagnosed for the installed specification. Safety-system warnings, seatbelt or airbag issues and advanced control-unit work require qualified handling; convenient access or a functioning screen does not prove those systems are safe.
A displaced rear panel or damaged load-area trim may lead to further inspection of adjoining supports. Tell the workshop if seats, belt areas or electrical equipment were affected. These observations help define the need for suitably capable safety assessment. They are not a promise that CarTech Hub can carry out every structural or restraint-system repair.