Tell us which warning light came on and what your car was doing at the time. We’ll confirm which scanner checks your vehicle supports, explain the findings and agree on the next step with you.
Diagnostic information updated 29 October 2026 · Independent multi-brand workshop
Tell us the vehicle’s year of manufacture, variant, engine or fuel type, and the exact warning message. Different versions of the Indigo CS/eCS may have different control units and require different diagnostic access.
Read the service guide for the Tata Indigo CS/eCS →
This is a model-specific enquiry page. The workshop can confirm which checks your model year and control system support.
CarTech Hub uses LAUNCH Scan Plus X and XTOOL Compass for scanner-assisted fault finding in Sawkuchi, Guwahati. Share your car’s make, model, year, fuel type and warning message so we can confirm the relevant scanner coverage before your visit.
Ask about a Scan Plus X check when reporting a warning light, starting problem or electronic-system concern. We first confirm communication with the relevant control unit and the diagnostic functions available for your vehicle.
The installed software, vehicle year, engine and control unit determine which checks are possible. Code reading, live-data checks and service functions are confirmed for the job before work begins.
LAUNCH official vehicle-coverage resource ↗XTOOL’s Compass information lists fault-code reading and clearing, live data, freeze-frame information, actuator tests and reports from scans before and after work. Availability depends on the vehicle and supported system.
We use the relevant information to investigate your complaint and explain the next check. XTOOL lists Compass and Compass Master configurations separately, so optional hardware and programming access are confirmed for each task.
XTOOL official Compass product information ↗We accept scanning enquiries for Indian, Japanese, Korean, European and other car brands. A brand or model listing does not confirm access to every control unit. The vehicle’s ECU, software version, licence, security access and any required accessories affect the work we can accept.
Ask separately about service resets, adaptations, coding, programming, ADAS calibration or EV high-voltage work. These need the right equipment and procedures; they are not automatically part of a basic scan. A fault code helps direct an investigation and does not by itself prove which part needs replacing.
XTOOL vehicle and function lookup ↗ Find your brand and model →
CarTech Hub first records the warning and the driving conditions in which it appeared. On supported vehicles, the technician reads the engine, ABS or airbag control module and checks whether its fault codes are current or stored. For an engine complaint, freeze-frame data and sensor readings can show the engine’s operating conditions when the fault occurred. For ABS, individual wheel-speed readings can help isolate an inconsistent signal. An airbag warning calls for a restraint-system assessment using the manufacturer’s procedures. The technician explains any further tests and discusses the repair estimate with you before you approve the work.
A fault code is one clue. The technician compares it with the symptoms you describe and the condition of the vehicle before recommending further checks.
Share the vehicle details, warning message, recent work and the conditions in which the issue appears.
We check whether the scanner supports the system you want tested and agree with you on what the initial assessment will cover.
Available codes and data guide further electrical or mechanical checks. A stored code alone does not justify replacing a part.
Discuss what is confirmed, what still needs testing and the estimate before approving further work.
Where appropriate, repeat relevant checks and review the original complaint. Clearing the warning light alone is not a completed diagnosis.
The directory has 765 model entries across 36 brands, including earlier generations and variants. Choose your car and tell us its model year, fuel type, variant and warning message. The workshop will confirm which control units it can check and which repairs it can undertake.
37 matching model entries · Showing 1–24 · Browse Tata diagnostics
Coverage depends on the model year, control unit, software and access requirements. Tell us the symptoms or warning message so we can check whether the relevant function is supported before you visit.
A code records a condition detected by the car. A technician may need to inspect wiring, power supply, mechanical components or operating conditions before recommending a replacement.
Programming and calibration are separate jobs. Before booking, ask what hardware and software access the work requires, whether a trained technician is available and what the work would cost for your vehicle.
Bring your vehicle details, a description of the symptoms, relevant service records and any earlier scan report. Tell us about recent battery work and whether anyone cleared the fault codes.
Petrol ignition requirements differ from diesel injection and applicable glow-system checks. The correct maintenance schedule and actual installation should guide fluids, filtration and related inspection, rather than combining every possible CS/eCS engine component into a universal diagnostic list.
Describe starting difficulty, temperature changes, a warning light or reduced performance with the conditions in which it occurs. Injectors, sensors and engine mounts may be relevant inspection items, but the complaint alone cannot establish that they need replacement. Cooling checks should consider radiator condition, fan operation, hoses and evidence of leakage before assuming major engine damage.
A difficult shift should not automatically lead to internal gearbox replacement. Record whether the concern appears in one gear, while stationary, when hot or during acceleration. Transmission mounts and driveshaft/CV-joint components, where applicable to the actual assembly, should be considered using inspection evidence. Confirm the scope before approving dismantling.
Inspect the fitted brake pads, discs, rear friction components and hydraulic condition. Some braking equipment or ABS provision differs by variant; do not quote sensors or assemblies as though every example has the same specification. Dampers, arms, bushes, steering joints and wheel bearings require condition and fitment checks when noise, looseness or tyre wear is reported.
For AC work, the blower and airflow path are distinct from the refrigerant circuit and compressor. A condenser damaged in a collision needs its own assessment. Battery condition, alternator output, starter operation, fuses, relays and wiring faults should be examined with attention to previous accessory work. Electrical repair should correct the cause, not bypass protective devices.
Report the claim through the contact process on the policy. Preserve photographs and describe the event accurately. The insurer can request policy documents, RC, driving licence, claim form, incident information and additional reports where necessary. Understand whether inspection or survey must precede dismantling and retain evidence of hidden damage if further work is authorised.