Tell us which warning light came on and what your car was doing at the time. We’ll confirm which scanner checks your vehicle supports, explain the findings and agree on the next step with you.
Diagnostic information updated 29 October 2026 · Independent multi-brand workshop
Tell us the vehicle’s year of manufacture, variant, engine or fuel type, and the exact warning message. Different versions of the Duster New Generation may have different control units and require different diagnostic access.
Read the service guide for the Renault Duster New Generation →
This is a model-specific enquiry page. The workshop can confirm which checks your model year and control system support.
CarTech Hub uses LAUNCH Scan Plus X and XTOOL Compass for scanner-assisted fault finding in Sawkuchi, Guwahati. Share your car’s make, model, year, fuel type and warning message so we can confirm the relevant scanner coverage before your visit.
Ask about a Scan Plus X check when reporting a warning light, starting problem or electronic-system concern. We first confirm communication with the relevant control unit and the diagnostic functions available for your vehicle.
The installed software, vehicle year, engine and control unit determine which checks are possible. Code reading, live-data checks and service functions are confirmed for the job before work begins.
LAUNCH official vehicle-coverage resource ↗XTOOL’s Compass information lists fault-code reading and clearing, live data, freeze-frame information, actuator tests and reports from scans before and after work. Availability depends on the vehicle and supported system.
We use the relevant information to investigate your complaint and explain the next check. XTOOL lists Compass and Compass Master configurations separately, so optional hardware and programming access are confirmed for each task.
XTOOL official Compass product information ↗We accept scanning enquiries for Indian, Japanese, Korean, European and other car brands. A brand or model listing does not confirm access to every control unit. The vehicle’s ECU, software version, licence, security access and any required accessories affect the work we can accept.
Ask separately about service resets, adaptations, coding, programming, ADAS calibration or EV high-voltage work. These need the right equipment and procedures; they are not automatically part of a basic scan. A fault code helps direct an investigation and does not by itself prove which part needs replacing.
XTOOL vehicle and function lookup ↗ Find your brand and model →
CarTech Hub first records the warning and the driving conditions in which it appeared. On supported vehicles, the technician reads the engine, ABS or airbag control module and checks whether its fault codes are current or stored. For an engine complaint, freeze-frame data and sensor readings can show the engine’s operating conditions when the fault occurred. For ABS, individual wheel-speed readings can help isolate an inconsistent signal. An airbag warning calls for a restraint-system assessment using the manufacturer’s procedures. The technician explains any further tests and discusses the repair estimate with you before you approve the work.
A fault code is one clue. The technician compares it with the symptoms you describe and the condition of the vehicle before recommending further checks.
Share the vehicle details, warning message, recent work and the conditions in which the issue appears.
We check whether the scanner supports the system you want tested and agree with you on what the initial assessment will cover.
Available codes and data guide further electrical or mechanical checks. A stored code alone does not justify replacing a part.
Discuss what is confirmed, what still needs testing and the estimate before approving further work.
Where appropriate, repeat relevant checks and review the original complaint. Clearing the warning light alone is not a completed diagnosis.
The directory has 765 model entries across 36 brands, including earlier generations and variants. Choose your car and tell us its model year, fuel type, variant and warning message. The workshop will confirm which control units it can check and which repairs it can undertake.
13 matching model entries · Showing 1–13 · Browse Renault diagnostics
Coverage depends on the model year, control unit, software and access requirements. Tell us the symptoms or warning message so we can check whether the relevant function is supported before you visit.
A code records a condition detected by the car. A technician may need to inspect wiring, power supply, mechanical components or operating conditions before recommending a replacement.
Programming and calibration are separate jobs. Before booking, ask what hardware and software access the work requires, whether a trained technician is available and what the work would cost for your vehicle.
Bring your vehicle details, a description of the symptoms, relevant service records and any earlier scan report. Tell us about recent battery work and whether anyone cleared the fault codes.
A hesitation can be influenced by engine response, transmission operation, electrical information or mounting and driveline condition. The customer's description is valuable, but it is not a diagnosis. Tell the workshop what the car was doing, how warm it was, which warning appeared and whether the symptom followed service, impact or water exposure.
Applicable parts can include spark plugs, ignition coils, injectors, engine mounts, filters, sensors, hoses, a radiator, thermostat, water pump and cooling fan. The exact application is established before an estimate. Engine overhaul, internal turbo work or complex fuel-system repairs are accepted only when the necessary capability and technical support are confirmed. A significant leak or overheating warning should be assessed before continued driving creates additional damage.
Owners should explain whether an engagement concern occurs when cold, manoeuvring, climbing or driving after prolonged traffic. The workshop can separate engine response, mounting or driveline observations from a transmission-control concern. Manual cars have their own clutch and gear-selection assessment. The new Duster DCT and turbo guide explains why advanced work is confirmed individually and may require manufacturer or specialist support.
For CarTech Hub's parts desk, record the VIN, engine, gearbox and damaged component. A bumper, headlamp, mirror, grille, bonnet, door or windshield from the old Duster is not assumed suitable for this vehicle. Sensors, connectors and mountings can affect fitment and repair scope. Parts availability, compatibility and delivery time will be confirmed after vehicle inspection and model verification. No immediate stock, fixed price or delivery date is promised before that assessment.
A transmission or turbo complaint that arises after an accident needs an evidence-based inspection of the affected areas. Mountings, wiring, cooling components or underbody damage may be relevant, but the timing alone does not prove that an insured accident caused every fault. Routine deterioration is not automatically covered by a motor policy.
The delivered vehicle and actual powertrain must be identified first. An E-Tech hybrid has different driveline and safety requirements; a petrol diagnostic enquiry does not establish that high-voltage battery, inverter or hybrid-system work can be accepted.