Tell us which warning light came on and what your car was doing at the time. We’ll confirm which scanner checks your vehicle supports, explain the findings and agree on the next step with you.
Diagnostic information updated 29 October 2026 · Independent multi-brand workshop
Tell us the vehicle’s year of manufacture, variant, engine or fuel type, and the exact warning message. Different versions of the Discovery Sport may have different control units and require different diagnostic access.
Read the service guide for the Land Rover Discovery Sport →
This is a model-specific enquiry page. The workshop can confirm which checks your model year and control system support.
CarTech Hub uses LAUNCH Scan Plus X and XTOOL Compass for scanner-assisted fault finding in Sawkuchi, Guwahati. Share your car’s make, model, year, fuel type and warning message so we can confirm the relevant scanner coverage before your visit.
Ask about a Scan Plus X check when reporting a warning light, starting problem or electronic-system concern. We first confirm communication with the relevant control unit and the diagnostic functions available for your vehicle.
The installed software, vehicle year, engine and control unit determine which checks are possible. Code reading, live-data checks and service functions are confirmed for the job before work begins.
LAUNCH official vehicle-coverage resource ↗XTOOL’s Compass information lists fault-code reading and clearing, live data, freeze-frame information, actuator tests and reports from scans before and after work. Availability depends on the vehicle and supported system.
We use the relevant information to investigate your complaint and explain the next check. XTOOL lists Compass and Compass Master configurations separately, so optional hardware and programming access are confirmed for each task.
XTOOL official Compass product information ↗We accept scanning enquiries for Indian, Japanese, Korean, European and other car brands. A brand or model listing does not confirm access to every control unit. The vehicle’s ECU, software version, licence, security access and any required accessories affect the work we can accept.
Ask separately about service resets, adaptations, coding, programming, ADAS calibration or EV high-voltage work. These need the right equipment and procedures; they are not automatically part of a basic scan. A fault code helps direct an investigation and does not by itself prove which part needs replacing.
XTOOL vehicle and function lookup ↗ Find your brand and model →
CarTech Hub first records the warning and the driving conditions in which it appeared. On supported vehicles, the technician reads the engine, ABS or airbag control module and checks whether its fault codes are current or stored. For an engine complaint, freeze-frame data and sensor readings can show the engine’s operating conditions when the fault occurred. For ABS, individual wheel-speed readings can help isolate an inconsistent signal. An airbag warning calls for a restraint-system assessment using the manufacturer’s procedures. The technician explains any further tests and discusses the repair estimate with you before you approve the work.
A fault code is one clue. The technician compares it with the symptoms you describe and the condition of the vehicle before recommending further checks.
Share the vehicle details, warning message, recent work and the conditions in which the issue appears.
We check whether the scanner supports the system you want tested and agree with you on what the initial assessment will cover.
Available codes and data guide further electrical or mechanical checks. A stored code alone does not justify replacing a part.
Discuss what is confirmed, what still needs testing and the estimate before approving further work.
Where appropriate, repeat relevant checks and review the original complaint. Clearing the warning light alone is not a completed diagnosis.
The directory has 765 model entries across 36 brands, including earlier generations and variants. Choose your car and tell us its model year, fuel type, variant and warning message. The workshop will confirm which control units it can check and which repairs it can undertake.
14 matching model entries · Showing 1–14 · Browse Land Rover diagnostics
Coverage depends on the model year, control unit, software and access requirements. Tell us the symptoms or warning message so we can check whether the relevant function is supported before you visit.
A code records a condition detected by the car. A technician may need to inspect wiring, power supply, mechanical components or operating conditions before recommending a replacement.
Programming and calibration are separate jobs. Before booking, ask what hardware and software access the work requires, whether a trained technician is available and what the work would cost for your vehicle.
Bring your vehicle details, a description of the symptoms, relevant service records and any earlier scan report. Tell us about recent battery work and whether anyone cleared the fault codes.
Reduced power, rough running or a warning message needs suitable scanning and physical inspection before parts are selected. Investigate fuel, intake, boost, sensor and supply-related causes according to the vehicle. For cooling concerns, inspect coolant condition, hoses, radiator, fans, thermostat and water pump as relevant. Belts, mounts, seals and gaskets should be checked when justified by the schedule or symptom. Engine overhaul and specialist rebuilding require separately confirmed capability.
Inspect transmission mounts, leakage, driveshaft boots and relevant coupling or rear-drive components when the symptom requires it. Terrain Response is not evidence of a selectable low-range transfer gearbox. These components should not be ordered as full-size Discovery transfer-box parts. Advanced transmission, coupling and differential work requires suitable diagnosis and a separately agreed specialist scope.
Explain whether a cabin-comfort problem concerns airflow, temperature, noise or a particular seating area. Check the applicable cabin filter, blower operation, leakage evidence and system readings before deciding on condenser, evaporator or compressor work. Electrified equipment and thermal-management procedures need the relevant training and safety arrangements; a general AC inspection is not a promise to repair every circuit.
Low-voltage battery condition, lights, fuses, relays, switches and accessible wiring can help investigate supported electrical concerns. Record warnings before information is cleared. Mild-hybrid supply and control equipment must be distinguished from an ordinary low-voltage battery fault. Programming, security functions and advanced module repair are separately assessed specialist jobs.
Assess the actual brakes and parking-brake procedure alongside tyres, wheels, bearings, arms and joints as the symptom requires. Pulling or uneven wear should be connected to observed condition before a replacement part is named.
Third-row fittings and rear-cabin functions depend on the installed interior. Confirm the required function and actual equipment before selecting a component; a shared L550 designation does not make every trim or later electrical part interchangeable.