Tell us which warning light came on and what your car was doing at the time. We’ll confirm which scanner checks your vehicle supports, explain the findings and agree on the next step with you.
Diagnostic information updated 29 October 2026 · Independent multi-brand workshop
Tell us the vehicle’s year of manufacture, variant, engine or fuel type, and the exact warning message. Different versions of the RS 3 may have different control units and require different diagnostic access.
Read the service guide for the Audi RS 3 →
This is a model-specific enquiry page. The workshop can confirm which checks your model year and control system support.
CarTech Hub uses LAUNCH Scan Plus X and XTOOL Compass for scanner-assisted fault finding in Sawkuchi, Guwahati. Share your car’s make, model, year, fuel type and warning message so we can confirm the relevant scanner coverage before your visit.
Ask about a Scan Plus X check when reporting a warning light, starting problem or electronic-system concern. We first confirm communication with the relevant control unit and the diagnostic functions available for your vehicle.
The installed software, vehicle year, engine and control unit determine which checks are possible. Code reading, live-data checks and service functions are confirmed for the job before work begins.
LAUNCH official vehicle-coverage resource ↗XTOOL’s Compass information lists fault-code reading and clearing, live data, freeze-frame information, actuator tests and reports from scans before and after work. Availability depends on the vehicle and supported system.
We use the relevant information to investigate your complaint and explain the next check. XTOOL lists Compass and Compass Master configurations separately, so optional hardware and programming access are confirmed for each task.
XTOOL official Compass product information ↗We accept scanning enquiries for Indian, Japanese, Korean, European and other car brands. A brand or model listing does not confirm access to every control unit. The vehicle’s ECU, software version, licence, security access and any required accessories affect the work we can accept.
Ask separately about service resets, adaptations, coding, programming, ADAS calibration or EV high-voltage work. These need the right equipment and procedures; they are not automatically part of a basic scan. A fault code helps direct an investigation and does not by itself prove which part needs replacing.
XTOOL vehicle and function lookup ↗ Find your brand and model →
CarTech Hub first records the warning and the driving conditions in which it appeared. On supported vehicles, the technician reads the engine, ABS or airbag control module and checks whether its fault codes are current or stored. For an engine complaint, freeze-frame data and sensor readings can show the engine’s operating conditions when the fault occurred. For ABS, individual wheel-speed readings can help isolate an inconsistent signal. An airbag warning calls for a restraint-system assessment using the manufacturer’s procedures. The technician explains any further tests and discusses the repair estimate with you before you approve the work.
A fault code is one clue. The technician compares it with the symptoms you describe and the condition of the vehicle before recommending further checks.
Share the vehicle details, warning message, recent work and the conditions in which the issue appears.
We check whether the scanner supports the system you want tested and agree with you on what the initial assessment will cover.
Available codes and data guide further electrical or mechanical checks. A stored code alone does not justify replacing a part.
Discuss what is confirmed, what still needs testing and the estimate before approving further work.
Where appropriate, repeat relevant checks and review the original complaint. Clearing the warning light alone is not a completed diagnosis.
The directory has 765 model entries across 36 brands, including earlier generations and variants. Choose your car and tell us its model year, fuel type, variant and warning message. The workshop will confirm which control units it can check and which repairs it can undertake.
35 matching model entries · Showing 1–24 · Browse Audi diagnostics
Coverage depends on the model year, control unit, software and access requirements. Tell us the symptoms or warning message so we can check whether the relevant function is supported before you visit.
A code records a condition detected by the car. A technician may need to inspect wiring, power supply, mechanical components or operating conditions before recommending a replacement.
Programming and calibration are separate jobs. Before booking, ask what hardware and software access the work requires, whether a trained technician is available and what the work would cost for your vehicle.
Bring your vehicle details, a description of the symptoms, relevant service records and any earlier scan report. Tell us about recent battery work and whether anyone cleared the fault codes.
Review tyre condition and actual front/rear sizes, brake behaviour, coolant observations and battery health before a longer Assam trip. Monsoon preparation includes visibility and any sealing concerns. These checks support ordinary ownership; they do not imply ECU tuning, output upgrades, track preparation or modification calibration at the workshop.
Record a misfire, warning, boost concern or coolant loss with its operating conditions. Supported inspection and fault information guide further checks; they do not prove that a turbocharger, injector or sensor has failed. Petrol plugs, coils, intake connections, mounts, cooling hoses, radiator and pump-related parts are considered against the identified engine and findings. An ordinary A3 list is not sufficient to establish every RS component reference.
Cooling damage after an impact follows the accident route rather than a guessed maintenance repair. Discuss which diagnostic operations can be accepted and which require a specialist provider. Engine rebuilding, turbo restoration and proprietary electronic procedures are not advertised as universal CarTech Hub capabilities.
A shudder or knock may involve tyres, mounts, shafts or other causes. S tronic internals, a newer torque splitter or earlier drivetrain equipment require the right specialist route. A general inspection does not establish internal repair, protected adaptation or performance-control programming capability.
Describe wheel contact, broken glass, fluid leakage, warning messages and any impaired steering or unsecured panel. A car that looks driveable in a photograph may still need transport or specialist receiving arrangements. Use CarTech Hub contact before bringing a significantly damaged vehicle. Do not touch exposed electrical or restraint equipment, force damaged openings or drive to reproduce a dangerous symptom.
Where a wheel was struck, inspect relevant tyre, rim, bearing, braking, suspension and steering components using appropriate methods. A warning or vibration does not identify a failed torque splitter or gearbox on its own. Restraint, structural and fitted assistance-system concerns require qualified assessment and any prescribed specialist setup; they are not resolved by repainting the adjacent panel.